LOADING IMAGES

SPDIF/TOSLINK Digital Optical Audio 1×3 Splitter

Package Content

INTRODUCTION

The Toslink splitter splits a single S/PDIF (Toslink) Digital Optical Audio signal into three outputs. It allows you to connect a single optical audio source, such as the output of a gaming console or Blu-ray player, to three devices, such as a television and an AV receiver, or amplifier. Provide clean, accurate audio, with no distortion or signal interference.

FEATURES
  • Support signal re-timing.
  • Audio format support: LPCM2.0/DTS 5.1/Dolby-AC3 5.1.
  • Support output transmission distance up to 40m via optical fiber cable that losses less than 0.2dB/m.
  • Sampling frequency: up to 192KHz.
  • Over-voltage protection.
  • No loss of quality.
  • Installs in minutes.
SPECIFICATIONS
Support Audio Format

  • LPCM2.0/DTS/Dolby Digital

Peak Wavelength

  • 650nm

Max Baud Rate

  • 16Mbps

Output Cable Distance

  • ≤40m(Use the optical fiber cable that losses less than 0.2dB/m)

Power Supply

  • USB Power Cable

Operating Temperature Range

  • (0℃ to 40℃)

Operating Humidity Range

  • 5% to 90%RH(no condensation)

Note: Specifications are subject to change without notice.